TITANOS Flowing Agent SCSA 358

TITANOS Flowing Agent SCSA 358

TITANOS flowing agent SCSA 358 Description Polyacrylate based surface additive for solvent-borne coating systems and ambient curing plastic systems to improve leveling. For semi-polar to polar systems. Product Data Composition Solution of a polyacrylate Typical Properties The values indicated in...

Send Inquiry Chat Now

TITANOS flowing agent SCSA 358

Description

Polyacrylate based surface additive for solvent-borne coating systems and ambient curing plastic systems to improve leveling. For semi-polar to polar systems.

Product Data

Composition

Solution of a polyacrylate

Typical Properties

The values indicated in this data sheet describe typical properties and do not constitute specification limits.

Density (20 °C): 0.95 g/ml

Non-volatile matter (10 min., 150 °C): 52 %

Solvents: Alkylbenzenes

Flash point: 47 °C

Applications

Coatings Industry

Special Features and Benefits

The additive is used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. PBSA-358 does not cause turbidity in clear coats or haze in pigmented systems. The additive is thermally stable.

Recommended Levels

0.1-1 % additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition.

Ambient-curing Plastic Systems

Special Features and Benefits

The additive is used as an anti-cratering and leveling additive in all solvent-borne and solvent-free systems.

It only provides a minor reduction of the surface tension and facilitates the acceptance of spray mist and dust. PBSA-358 does not cause turbidity in non-pigmented systems or haze in pigmented systems.

Recommended Use

The additive is recommended for all ambient curing resin systems such as unsaturated polyester resins and epoxy resins.

Recommended Levels

0.1-0.5 % additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition.

etitanos

Hot Tags: titanos flowing agent scsa 358, China, suppliers, factory, buy, price
Related Products

Copyright © Shanghai Titanos Industry Co.,Ltd. All rights reserved.